Products
Products
Single-conductor Heating Mat Series
Single-conductor Heating Mat Series
Single-conductor Heating Mat Series

Ground heating cable carbon fiber heating wire electric hotline new infrared heating pad

TXLP/1 220V single-guide heating cable is mainly used in floor heating, soil heating, snow melting, etc.

heating pad

Dual-conductor Heating Mat Series

 

 

Dual-conductor Heating Mat Series

1. Introduction of Single-conductor Heating Mat Series

With the improvement of people's living standards, the demand for heating is not just about warmth. People also have certain requirements for the comfort, health, and environmental friendliness of heating. Healthy Heating - Single-conductor Heating Cable Floor Heating Mat is the right choice for your healthy new life.

 

The Single-conductor heating cable/heat mat uses a 3.5mm diameter high-temperature resistant fluoroplastic Single-conductor heating cable and a fiberglass mesh. The floor heating mat is an innovative floor heating system that can be directly embedded under the ground cover material with a 8-10mm adhesive layer, without the need for a cement layer. It is flexible and easy to install, allowing for standardized operations, and suitable for various floor coverings. Whether it is a concrete floor, wooden floor, old tiled floor, or terrazzo floor, it can be installed in the tile adhesive with minimal impact on the floor level.

 

The Single-conductor ultra-thin heat mat can also be directly installed on the existing floor without the need for other treatments. The very thin preheating layer allows you to achieve the desired floor temperature within 20-30 minutes after starting the system. Therefore, this fast-heating heating system is a great choice for home environments such as bathrooms. (The heating cable is also known as the floor heating cable.)

 

Product Name: Single-conductor Heating Mat Series

Temperature Range: 0-65℃

Temperature Resistance: 105℃

Standard Power: 150 200W/M2

Common Voltage: 230V

Product Certification: CE RoHs CMA Ex ISO9001

   

 

2. Performance of the Heating Mat:

1). Structure

Outer Sheath: Polyvinylidene Fluoride (FEP)

Ground Wire: Bare Copper Wire

Shielding Layer: Aluminum Foil + Copper Wire

Inner Conductor: Alloy Resistance Wire + Copper Wire

Inner Insulation: Polyvinylidene Fluoride (FEP)

Connector Type: External Connector

 

2). Dimensions

Outer Diameter: 3.5mm

 

3). Electrical Parameters

Supply Voltage: 220V (Customizable voltage available)

Linear Power: 12W/m

Power Density: 150W/m2

Single-conductor Heating Mat

Send Inquiry
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
Related Products
TXLP dual hair heating line

TXLP/2R 220V dual-guide heating cable is mainly used in floor heating, soil heating, snow melting, pipeline heating, etc.

Read More
TXLP single -direction heat line

<p>There is no need to lay a cement layer, and it can be directly buried under the 8-10mm adhesive of the ground decoration material. Flexible laying, easy installation, easy standardization and operation, suitable for various floor decoration materials. Whether it is a concrete floor, wooden floor, old tile floor or terrazzo floor, it can be installed on the tile glue with little effect on the ground level.</p>

Read More
MI heating cable

<p>Cover material: (316L) stainless steel, (CU) copper, (AL) 825 alloy, (CN) copper-nickel alloy</p>

Read More
Parallel constant power

<p>Parallel constant wattage heating cables can be used for pipe and equipment freeze protection and process temperature maintenance where high power output or high temperature exposure is required. This type offers an economical alternative to self-regulating heating cables, but requires more installation skill and a more advanced control and monitoring system.Constant wattage heating cables can provide process temperature maintenance up to 150&deg;C and can Withstands exposure temperatures up to 205&deg;C when powered on.</p>

Read More
Self-limiting heating cable-GBR-50-220-FP

<p>High temperature shielded type, the output power per meter is 50W at 10&deg;C, and the working voltage is 220V.</p>

Read More
Selflimiting heating cable-ZBR-40-220-J

<p>Medium temperature shielded type, the output power per meter is 40W at 10&deg;C, and the working voltage is 220V.</p>

Read More
Series constant power heating cable

<p>HGC series connecting constant power heating cables use core conductor as heating element.</p>

Read More
Silicone strap

<p>Silicone sheet electric heating belt is a thin strip heating product (standard thickness is 1.5mm). It has good flexibility and can be wrapped around a pipe or other heating body with heat-resistant tape to fix it like a rope, or it can be directly wrapped in a heated The outside of the body is fixed with a spring hook, and the heating performance is better if an insulation layer is added. The heating element is made of nickel-chromium wire wrapped with heat-conducting and insulating silicone material, which is molded at high temperature, so the safety performance is very reliable. Pay attention to avoid overlapping winding installation as much as possible, so as not to affect heat transfer and affect the service life of the product.</p>

Read More
Top

Home

Products

whatsapp